Ethernet over Fiber

Ethernet Media Converter
NIF-iSA/NIF-iMA
Ethernet over Fiber
The 10/100Base-T Ethernet media converter can be used for extending the transmission distance between two Fast Ethernet devices via fiber cable transparently with no performance degradation.

Auto-negotiation allows the converter to operate in either MDI or MDI-X crossover for direct connection to either of the workstation, Switch or Hub.

Auto-negotiation allows the converter to operate in either full or half duplex mode.

And this equipment also features auto-negotiation in either 10Base-T or 100Base-T mode for dual speed model.

Features

> Comply with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX standards
> Optical reachable distance from 2Km to 120Km
> Auto-negotiate to half / full duplex mode
> Auto-negotiate to 10/100Base-T dual speed
> Auto-negotiate to MDI/MDI-X
> Supports the maximal data packages to 1600bytes
> The bandwidth can be controlled at 2.5 -5- 7.5- 10- 25- 50- 75- 100Mbps separately via the Network Management System
> Supports LFP (link fault pass-through)
> Optical interface: SC.Bi-Di.LC or ST can be selected

Typical Application

           Ethernet over Fiber

Technical specification

Interface:
>Standard:IEEE802.3 802.3u
> Auto-negotiation on half/full duplex mode, 10/100
   dual speed and MDI/MDI-X
> LFP (link fault pass-through) function
> Wavelength: SM 1310nm/1550nmMM1310nm
> Optic connector:SC, Bi-Di, LC, or ST can be selected
> Transmission distance: SM 20~120Km;MM 2Km
Others:
> Power supply:
  90~240VAC 2.5W (for stand alone style)
> Dimensions:
   stand alonestyle:150mm(L)x92mm(W)x21.7mm(H)
   card style: 87mm(L)x22.2mm(W)x113.5mm(H)
> Operation temperature:0~50°C
> Humidity:10%~90%RH(non-condensing)